Windows Media Encoder 9 - Best Screen Capture Software

If you are looking for one the best screen capture software for Windows 2000 & Windows XP, I would recommend Windows Media Encoder 9.

It is not pre-installed with Xindow XP or Windows 2000. Therefore you need to download the software, at the following url.

http://www.microsoft.com/downloads/details.aspx?FamilyID=5691ba02-e496-465a-bba9-b2f1182cdf24&displaylang=en

Minimum requirements to run the software on your personal computer depends on the application you want to do.

The hardware requirements are as follows.

1. To convert a file, Minimum configuration is a 266 megahertz (MHz) processor and 64 megabytes (MB) of RAM. (It is better if you have 500 MHz processor or higher, Windows XP, and 128 MB of RAM)
2. To capture and broadcast audio and video files for 28.8 kilobits per second (Kbps) and 56 Kbps modems (using the Windows Media Audio 9 and Windows Media Video 7 codecs), Minimum configuration is a 300 MHz processor and 64 MB of RAM. For mid-bandwidth (100 Kbps to 500 Kbps) audiences. Better to have 666 MHz processor or higher, Windows XP, and 256 MB of RAM.
3. To capture and broadcast audio and video files for 28.8 Kbps and 56 Kbps modems, (using the Windows Media Audio and Video 9 Series codecs). The minimum configuration is a 1.5 gigahertz (GHz) processor and 64 MB of RAM. For mid-bandwidth (100 Kbps to 500 Kbps) audiences, the recommended configuration is a 1 GHz dual processor or higher, Windows XP, and 256 MB of RAM.
4. To capture and broadcast an audio and video stream for high-bandwidth (500 Kbps through 2 Mbps) audiences (using the Windows Media Audio and Video 9 Series codecs). The recommended configuration is a 2 GHz dual processor or higher, Windows XP, and 256 MB of RAM.

To install Windows Media Encoder 9 the steps are as follows:

Click the Download link in the page.

Then Save the program to your personal computer.

Once it has fully downloaded the file.

Run the program and restart your personal computer if required to setup the software.





To start capturing your video tutorial, the steps are as follows;

Run Windows Media Encoder 9.

Click File, Click New, Choose Capture Screen.

You could capture specific window, region of screen or the entire screen. Up to you.

Capture the audio from the default audio device.

Then click Next, save the file at specific location and Click Next.

You could use , Low, Medium & High setting. Depends on the quality of video you want to make. Then Click Next.

Enter the Display Information such as Title, Author, Rating & Description.

Then Click Finish, Click Start Encoding to record your computer screen.

Once you have done recording, click Stop .

To play the video, Click Play Output File.

Good Luck !